Global System for Mobiles

A GSM network is composed of several functional entities, whose functions and interfaces are specified. Figure 1 shows the layout of a generic GSM network. The GSM network can be divided into three broad parts. The Mobile Station is carried by the subscriber. The Base Station Subsystem controls the radio link with the Mobile Station. The Network Subsystem, the main part of which is the Mobile services Switching Center (MSC), performs the switching of calls between the mobile users, and between mobile and fixed network users. The MSC also handles the mobility management operations. Not shown is the Operations and Maintenance Center, which oversees the proper operation and setup of the network. The Mobile Station and the Base Station Subsystem communicate across the Um interface, also known as the air interface or radio link. The Base Station Subsystem communicates with the Mobile services Switching Center across the A interface.

Free Space Optics

Mention optical communication and most people think of fiber optics. But light travels through air for a lot less money. So it is hardly a surprise that clever entrepreneurs and technologists are borrowing many of the devices and techniques developed for fiber-optic systems and applying them to what some call fiber-free optical communication. Although it only recently, and rather suddenly, sprang into public awareness, free-space optics is not a new idea. It has roots that go back over 30 years--to the era before fiber-optic cable became the preferred transport medium for high-speed communication. In those days, the notion that FSO systems could provide high-speed connectivity over short distances seemed futuristic, to say the least. But research done at that time has made possible today's free-space optical systems, which can carry full-duplex (simultaneous bidirectional) data at gigabit-per-second rates over metropolitan distances of a few city blocks to a few kilometers.

FSO first appeared in the 60's, for military applications. At the end of 80's, it appeared as a commercial option but technological restrictions prevented it from success. Low reach transmission, low capacity, severe alignment problems as well as vulnerability to weather interferences were the major drawbacks at that time. The optical communication without wire, however, evolved! Today, FSO systems guarantee 2.5 Gb/s taxes with carrier class availability. Metropolitan, access and LAN networks are reaping the benefits. FSO success can be measured by its market numbers: forecasts predict it will reach a USS 2.5 billion market by 2006.

The use of free space optics is particularly interesting when we perceive that the majority of customers does not possess access to fibers as well as fiber installation is expensive and demands long time. Moreover, right-of-way costs, difficulties in obataining government licenses for new fiber installation etc. are further problems that has turned FSO into the option of choice for short reach applications.

FSO uses lasers, or light pulses, to send packetized data in the terahertz (THz) spectrum range. Air, ot fiber, is the transport medium. This means that urban businesses needing fast data and Internet access have a significantly lower-cost option.

An FSO system for local loop access comprises several laser terminals, each one residing at a network node to create a single, point-to-point link; an optical mesh architecture; or a star topology, which is usually point-to-multipoint. These laser terminals, or nodes, are installed on top of customers' rooftops or inside a window to complete the last-mile connection. Signals are beamed to and from hubs or central nodes throughout a city or urban area. Each node requires a Line-Of-Sight (LOS) view of the hub.

RFID

Radio Frequency Identification (RFID) is an automatic identification method, relying on storing and remotely retrieving data using devices called RFID tags or transponders. An RFID tag is a small object that can be attached to or incorporated into a product, animal, or person. RFID tags contain silicon chips and antennas to enable them to receive and respond to radio-frequency queries from an RFID transceiver. Passive tags require no internal power source, whereas active tags require a power source.

RFID tags can be either passive, semi-passive (also known as semi-active), or active.

Passive

Passive RFID tags have no internal power supply. The minute electrical current induced in the antenna by the incoming radio frequency signal provides just enough power for the CMOS integrated circuit (IC) in the tag to power up and transmit a response. Most passive tags signal by backscattering the carrier signal from the reader. This means that the aerial (antenna) has to be designed to both collect power from the incoming signal and also to transmit the outbound backscatter signal. The response of a passive RFID tag is not just an ID number (GUID): tag chip can contain nonvolatile EEPROM(Electrically Erasable Programmable Read-Only Memory) for storing data. Lack of an onboard power supply means that the device can be quite small: commercially available products exist that can be embedded under the skin. As of 2006, the smallest such devices measured 0.15 mm × 0.15 mm, and are thinner than a sheet of paper (7.5 micrometers).[4] The addition of the antenna creates a tag that varies from the size of postage stamp to the size of a post card. Passive tags have practical read distances ranging from about 2 mm (ISO 14443) up to a few meters (EPC and ISO 18000-6) depending on the chosen radio frequency and antenna design/size. Due to their simplicity in design they are also suitable for manufacture with a printing process for the antennae. Passive RFID tags do not require batteries, and can be much smaller and have an unlimited life span. Non-silicon tags made from polymer semiconductors are currently being developed by several companies globally. Simple laboratory printed polymer tags operating at 13.56 MHz were demonstrated in 2005 by both PolyIC (Germany) and Philips (The Netherlands). If successfully commercialized, polymer tags will be roll printable, like a magazine, and much less expensive than silicon-based tags.

Because passive tags are cheaper to manufacture and have no battery, the majority of RFID tags in existence are of the passive variety. As of 2005, these tags cost an average of Euro 0.20 ($0.24 USD) at high volumes.

Semi-passive

Semi-passive RFID tags are very similar to passive tags except for the addition of a small battery. This battery allows the tag IC to be constantly powered. This removes the need for the aerial to be designed to collect power from the incoming signal. Aerials can therefore be optimized for the backscattering signal. Semi-passive RFID tags are faster in response and therefore stronger in reading ratio compared to passive tags.

Active

Unlike passive and semi-passive RFID tags, active RFID tags (also known as beacons) have their own internal power source which is used to power any ICs and generate the outgoing signal. They are often called beacons because they broadcast their own signal. They may have longer range and larger memories than passive tags, as well as the ability to store additional information sent by the transceiver. To economize power consumption, many beacon concepts operate at fixed intervals. At present, the smallest active tags are about the size of a coin. Many active tags have practical ranges of tens of meters, and a battery life of up to 10 years.